Auto Flaw Identification X Yoke
Three kinds of pole feet supplied for different types of surface;
Lifting force ≥156.8N (16kg);
White light illumination ≥2000Lux;
UV lamp irradiance ≥7000μW/c㎡.
Auto Flaw Identification X Yoke
The LKMT-E3 X yoke features an integrated wireless design of the X yoke with camera and lithium battery.
Battery AC is available without an external power supply.
A spare battery power supply can be quickly replaced for continuous testing.
Each lithium battery power supply is equipped with an OLED display screen and operation buttons, which can display the remaining battery power and voltage, and set DC or AC testing mode, alternate or continuous working mode, and UV or white light mode.
It can identify the no-load status and automatically adjust the current to prevent being overloaded or damaged.
To guarantee a constant magnetic field and testing sensitivity, the yoke automatically power off when the lifting force decrease due to low battery.
A vest for keep yoke and accessaries is provided to free hands in different conditions.
Three kinds of pole feet supplied for different types of surface:
(1) Magnetic pole for flat surface weld, each pole foot is equipped 4 wheels with no resistance, which can be easily disassembled and replaced.
(2) Magnetic pole for pipeline (diameter ≥80mm) testing, each foot has a rotatable joint, which can adjust the angle of the magnetic pole with different pipe diameters to make the magnetic pole fit the curve of the pipe and ensure the inspection effective. Each pole foot is equipped 4 wheels with no resistance, which can be easily disassembled and replaced.
(3) Magnetic pole for fillet welds with angles ranging from 60° to 130°, each foot has a rotatable joint, which can adjust the angle of the magnetic pole to fit the fillet weld at different angles and ensure the inspection effective. Each pole foot is equipped 4 wheels with no resistance, which can be easily disassembled and replaced.
The probe is equipped with a 5 million pixel camera, which can wifi connect mobile phones, tablets or AR glasses LUKE App and real-time display the detecting status.
Auto flaw identification and alarm App features
(1) Wifi connected by scanning the QR code of yoke.
(2) Auto flaw identification and alarm, any flaw to be marked on the screen, and the marked picture to be saved to the device.
(3) Auto flaw length calculation by two fingers zoom in and note.
(4) The real-time inspection status can be saved as pictures or videos to device.
(5) Frames, pixels and alarm sound can be adjusted via App.
Sensitivity:CX-230/MTU-3
Lift Power:AC ≥156.8N（16kg）
Leg Distance:100mm*100mm
Pole Gap:≤0.5mm
Contact Size:Flat Surface Feet 19*19mm
Pipeline Feet 22*20mm
Fillet Welds Feet 28*19mm
White Light:≥2000Lux
UV Light:≥7000μW/cm2
Standard Compliance:•EN ISO9934-3-2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
•ISO 17638-2016 Non-destructive testing ofwelds - Magnetic particle testing
•ISO 3059-2012 Non-destructive testing–Penetrant testing and magnetic particle testing–Viewing conditions
•ISO 4986-2020 Steel and iron castings - Magnetic particle testing
•ISO 23278-2015 Non-destructive testing of welds-Magnetic particle testing Acceptance levels
•BS EN 1369-2012 Founding -Magnetic particle testing
•ASME V SE-709 Standard gude for Mafnetic particle examaination
•ASTM E1444 Standard practice for Magnetic particle testing
IP rating:IP65/IP67
Duty Cycle:50%, max on time 600s
Battery Capacity & Voltage:88.8Wh / 14.8V
X Yoke Dimensions & Weight:200*143*196mm / 3.6kg
Battery Dimensions & Weight:90*70*105mm / 0.64kg
Camera:5 million pixels
Wifi distance:Over 50m (without any obstruction)
1. Integrated X Yoke 1
2. Lithium battery 2
3. Battery charger 2
4. 1 set of auxiliary tools (screwdrivers)
5. Vest 1
6. Yoke carry case 1
7. Flat surface feet 4
8. Pipeline feet 4
9. Fillet welds feet 4
10. Documents (warranty card, operation manual, certificate)
11. Auto Flaw Identification App
