A power supply (has lithium battery) can offer both AC and DC to LKMT-D4 yoke by a cable with simplified plugs, which is ideal to where no AC socket is available.

Each lithium battery power supply is equipped with an OLED display screen and operation buttons, which can display the remaining battery power and voltage, and set DC or AC testing mode, alternate or continuous working mode, and UV or white light mode.

The Lithium battery can easily been pull out and replaced from the power supply.

It can identify the no-load status and automatically adjust the current to prevent being overloaded or damaged.

To guarantee a constant magnetic field and testing sensitivity, the yoke automatically power off when the lifting force decrease due to low battery.

A belt with bag for keep yoke and accessaries is provided to free hands in different conditions.

Optional angle feets for different types of surface.

Sensitivity:CX-230/MTU-3

Lift Power:AC≥68.6N（7kg）

Leg Distance:66—206mm (adjustable)

Contact Size:18*20mm

Magnetic Field Strength:Leg Distance 75mm：4.65mT（3.72kA/m）

                                            Leg Distance 200mm：1.95mT（1.56kA/m）

                                            Leg Distance 116mm：3.05mT（2.44kA/m）

                                            Super Power Mode 116mm：3.55mT（2.84kA/m）

White Light:≥2000Lux

UV Light:≥6000μW/cm2

Standard Compliance:•EN ISO9934-3-2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment

                                       •ISO 17638-2016 Non-destructive testing ofwelds - Magnetic particle testing

                                       •ISO 3059-2012 Non-destructive testing–Penetrant testing and magnetic particle testing–Viewing conditions

                                       •ISO 4986-2020 Steel and iron castings - Magnetic particle testing

                                       •ISO 23278-2015 Non-destructive testing of welds-Magnetic particle testing Acceptance levels

                                       •BS EN 1369-2012 Founding -Magnetic particle testing

                                       •ASME V SE-709 Standard gude for Mafnetic particle examaination

                                       •ASTM E1444 Standard practice for Magnetic particle testing

IP rating:IP65/IP67

Duty Cycle:50%, max on time 600s

Battery Capacity & Voltage:88.8Wh / 14.8V

Yoke Dimensions & Weight:200*48*158mm / 1.5kg

Power Supply Dimensions & Weight:180*105*65mm / 0.65kg (excluding battery)

Battery Dimensions & Weight:95*100*57mm / 0.48k

1. Yoke 1

2. Power supply 1

3. Lithium battery 1

4. Battery charger 1

5. Flat magnetic feet 2

6. Power cable 1

7. 1 set of auxiliary tools (screwdrivers)

8. Belt with bag 1

9. Yoke carry case 1

10. Documents (warranty card, operation manual, certificate)

11. A-type feet 2 (optional)

12. Slope surface feet 2 (optional)

13. Socket adapter (optional)