The LKMT-265 AC yoke has an adaptor power supply for socket AC from 85V to 265V, connected by a cable with simplified plugs.

The adaptor is equipped with an OLED display screen and operation buttons to set DC or AC testing mode, alternate or continuous working mode, and UV or white light mode.

Short leg super power mode is available to increase magnetic field strength and sensitivity.

Optional to work with a power supply (has lithium battery) and become the LKMT-D6, which is ideal to where no AC socket is available.

Optional angle feets for different types of surface.

Sensitivity:CX-230/MTU-3

Lift Power:AC ≥78.4N（8kg）

                   DC ≥245N（25kg）

Leg Distance:60—205mm (adjustable)

Contact Size:38*20mm

Magnetic Field Strength:Leg Distance 75mm：4.65mT（3.72kA/m）

                                            Leg Distance 200mm：1.95mT（1.56kA/m）

                                            Leg Distance 116mm：3.05mT（2.44kA/m）

                                            Super Power Mode 116mm：3.55mT（2.84kA/m）

White Light:≥2000Lux

UV Light:≥6000μW/cm2

Standard Compliance:•EN ISO9934-3-2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment

                                       •ISO 17638-2016 Non-destructive testing ofwelds - Magnetic particle testing

                                       •ISO 3059-2012 Non-destructive testing–Penetrant testing and magnetic particle testing–Viewing conditions

                                       •ISO 4986-2020 Steel and iron castings - Magnetic particle testing

                                       •ISO 23278-2015 Non-destructive testing of welds-Magnetic particle testing Acceptance levels

                                       •BS EN 1369-2012 Founding -Magnetic particle testing

                                       •ASME V SE-709 Standard gude for Mafnetic particle examaination

                                       •ASTM E1444 Standard practice for Magnetic particle testing

IP rating:IP65/IP67

Duty Cycle:50%, max on time 600s

Yoke Dimensions & Weight:200*48*158mm / 2.0k

1. Yoke 1

2. 85V to 265V AC adaptor power supply 1

3. Flat magnetic feet 2

4. Power cable 1

5. 1 set of auxiliary tools (screwdrivers)

6. Yoke carry case 1

7. Documents (warranty card, operation manual, certificate)

8. A-type feet 2 (optional)

9. Slope surface feet 2 (optional)

10. Socket adapter  (optional)

11. Power supply to become the LKMT-D6 1 (optional)

12. Lithium battery 1 (optional)

13. Battery charger 1 (optional)