The LKMT-220S AC Yoke has built-in white and UV light, with a cable and plug for 220V or 110V AC power supply.

Short leg super power mode is available to increase magnetic field strength and sensitivity.

Optional angle feets for different types of surface.

Sensitivity:CX-230/MTU-3

Lift Power:AC ≥68.6N（7kg）

Leg Distance:60—205mm (adjustable)

Contact Size:25*20mm

Magnetic Field Strength:Leg Distance 75mm：3.75mT（3.00kA/m）

                                            Leg Distance 200mm：1.6mT（1.28kA/m）

                                            Leg Distance 116mm：2.5mT（2.00kA/m）

                                            Super Power Mode 116mm：3.05mT（2.44kA/m）

White Light:≥2000Lux

UV Light:≥5000μW/cm2

Standard Compliance:•EN ISO9934-3-2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment

                                       •ISO 17638-2016 Non-destructive testing ofwelds - Magnetic particle testing

                                       •ISO 3059-2012 Non-destructive testing–Penetrant testing and magnetic particle testing–Viewing conditions

                                       •ISO 4986-2020 Steel and iron castings - Magnetic particle testing

                                       •ISO 23278-2015 Non-destructive testing of welds-Magnetic particle testing Acceptance levels

                                       •BS EN 1369-2012 Founding -Magnetic particle testing

                                       •ASME V SE-709 Standard gude for Mafnetic particle examaination

                                       •ASTM E1444 Standard practice for Magnetic particle testing

IP rating:IP65/IP67

Duty Cycle:50%, max on time 600s

Yoke Dimensions & Weight:200*48*158mm / 2.0kg

1. Yoke with 3m cable 1

2. Flat magnetic feet 2

3. 1 set of auxiliary tools (screwdrivers)

4. Yoke carry case 1

5. Documents (warranty card, operation manual, certificate)

6. A-type feet 2 (optional)

7. Slope surface feet 2 (optional)

8. Socket adapter (optional)