Surface and near-surface Inspection of all conductive materials;

No contact Inspection, ignore non-conductive coating, no grinding needed;

High Temperature Inspection up to 350℃;

Accurately calculate length and depth of flaw by mathematical model;

No consumables or coupling needed, low cost, no after-effect;

Sensitive Inspection to any direction of crack;

Optional encoder to record inspection scan;

C scanning with 3D imaging display, automatic flaw identification and warning;

Remote data transmission;

Optional cloud storage and database development;

Optional to work with ROV.

System: Windows7 (64-bit) operating system;

Display: 11.6in multi-touch screen can display clearly under strong light;

Storage: 4GB memory, 128G hard disk;

Camera: 8 million pixel HD camera;

Connections: Bluetooth, wifi, USB, HDMI, serial port RJ-45 etc;

Power supply: AC220V & Built-in 2 lithium batteries;

Working environment: temperature -20℃ to 50 ℃, Humidity 95%;

Protection level: Aluminum alloy case, IP65 protection level certification;

Host dimensions & weight: 320*250*110mm, 4kg;

Software display mode: real-time signal, C-scan 3D, auto identification and warning,etc;

Data Storage: parameters, C-scan image and waveform;

Test report: standard report & customized report.

Inspecting sensitivity: length ≥3mm, depth ≥0.5mm;

Coating depth: ≤5mm (non-conductive material);

Maximum near surface flaw depth: carbon steel 3mm, stainless steel 5mm, aluminum 10mm;

Inspecting scan speed range: 5-40mm /s;

Error rate: ≤10%;

Edge effect: ≤20mm;

Temperature range: -20℃ -350 ℃ (depending on the probe);

Adjustable Inspecting frequency: 1K-10K.

1, LKACFM-X1 lite host: 1;

2, Testing software: 1 set;

3, Charger: 1 set;

4, Standard probe: 1;

5, pen probe: 1;

6, Three array probe: 1;

7, Probe cable: 1;

8, Operation manual and certificate: 1;

9, Instrument case: 1.