The LKMT-D3S yoke features an integrated wireless design of the D-type yoke with camera and lithium battery.

Both AC and DC are available without an external power supply.

A spare battery power supply can be quickly replaced for continuous testing.  

Each lithium battery power supply is equipped with an OLED display screen and operation buttons, which can display the remaining battery power and voltage, and set DC or AC testing mode, alternate or continuous working mode, and UV or white light mode.

It can identify the no-load status and automatically adjust the current to prevent being overloaded or damaged.

To guarantee a constant magnetic field and testing sensitivity, the yoke automatically power off when the lifting force decrease due to low battery.

A vest for keep yoke and accessaries is provided to free hands in different conditions.

Optional angle feets for different types of surface.

The probe is equipped with a 5 million pixel camera, which can wifi connect mobile phones, tablets or AR glasses LUKE App and real-time display the detecting status.

Auto flaw identification and alarm App features

(1) Wifi connected by scanning the QR code of yoke.

(2) Auto flaw identification and alarm, any flaw to be marked on the screen, and the marked picture to be saved to the device.

(3) Auto flaw length calculation by two fingers zoom in and note.

(4) The real-time inspection status can be saved as pictures or videos to device.

(5) Frames, pixels and alarm sound can be adjusted via App.

Sensitivity:CX-230/MTU-3

Lift Power:AC ≥78.4N（8kg）

                   DC ≥196N（20kg）

Leg Distance:49—139mm (adjustable)

Contact Size:20*20mm

Magnetic Field Strength:Leg Distance 75mm：2.5mT（2.00kA/m）

                                            Leg Distance 97mm：1.88mT（1.50kA/m）

                                            Leg Distance 143mm：1.37mT（1.09kA/m）

White Light:≥2000Lux

UV Light:≥7000μW/cm2

Standard Compliance:•EN ISO9934-3-2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment

                                       •ISO 17638-2016 Non-destructive testing ofwelds - Magnetic particle testing

                                       •ISO 3059-2012 Non-destructive testing–Penetrant testing and magnetic particle testing–Viewing conditions

                                       •ISO 4986-2020 Steel and iron castings - Magnetic particle testing

                                       •ISO 23278-2015 Non-destructive testing of welds-Magnetic particle testing Acceptance levels

                                       •BS EN 1369-2012 Founding -Magnetic particle testing

                                       •ASME V SE-709 Standard gude for Mafnetic particle examaination

                                       •ASTM E1444 Standard practice for Magnetic particle testing

IP rating:IP65/IP67

Duty Cycle:50%, max on time 600s

Battery Capacity & Voltage:47.36Wh / 14.8V

Yoke Dimensions & Weight:219*54*191mm / 1.9kg

Battery Dimensions & Weight:55*65*100mm / 0.36kg

Camera:5 million pixels

Wifi distance:Over 50m (without any obstruction)

1. Integrated Yoke 1

2. Lithium battery 2

3. Battery charger 2

4. 45° magnetic feet 2

5. Flat magnetic feet 2

6. 1 set of auxiliary tools (screwdrivers)

7. Vest 1

8. Yoke carry case 1

9. Documents (warranty card, operation manual, certificate)

10. A-type feet 2 (optional)

11. Slope surface feet 2 (optional)